← Back to Blog

How to Convert an SRT File to Plain Text (3 Methods)

Rachel Nguyen··9 min read
SRTTranscriptionSubtitlesHow-To
SRT subtitle file opened in a text editor showing cue blocks with timestamps alongside clean plain text output

How to Convert an SRT File to Plain Text (3 Methods)

You downloaded an SRT file from your editor or captioning tool, and now you've got a wall of cue numbers and timestamp codes instead of readable dialogue. That format works fine for video players, but it's not what you need for a blog post, a Word document, or a searchable transcript.

Converting SRT to plain text means stripping the cue numbers, timestamp lines, and blank separators between cue blocks, leaving just the dialogue. Here are three methods depending on how long your file is and what you have available.

To convert an SRT file to plain text, open it in Notepad and delete the cue numbers, timestamp lines, and blank separators, leaving just the subtitle text. For large files, a free online SRT-to-text converter handles the cleanup in seconds. If you have the source video, PixScript exports a clean TXT transcript directly, skipping the conversion step altogether.

What's Inside an SRT File and Why It Needs Converting

SRT (SubRip Text) format stores subtitles in cue blocks, not flowing text. Each block has three parts: a sequential number, a timestamp line showing start and end times, and the subtitle text. A blank line separates each block from the next.

A typical block looks like this:

1
00:00:04,250 --> 00:00:07,100
Welcome to today's tutorial on video editing.

2
00:00:07,500 --> 00:00:10,800
We'll cover the basics in about 20 minutes.

The SRT format was created around 2001 by developer Nicolas Wallon as part of the SubRip software. Each cue block contains a sequence number, a timestamp in HH:MM:SS,mmm format, and the subtitle text, with a blank line separating each block from the next. A 10-minute video at normal dialogue pace generates 300 to 600 cue blocks; a 1-hour video produces 1,500 to 3,000 blocks across a file of 15 to 25 KB of text.

When you strip all the cue numbers and timestamps from a 1-hour recording, the remaining dialogue typically runs 6,000 to 10,000 words. UTF-8 is the correct encoding; files saved in Windows-1252 or Latin-1 produce corrupted characters for accented letters and non-Latin scripts.

The key formatting detail: SRT timestamps use a comma as the decimal separator (00:00:04,250), not a period. A period in that position breaks the format and prevents video players from reading the file correctly.

Understanding the structure makes the cleanup obvious: each block requires removing three elements (the number, the timestamp, the blank line) while keeping just the text line. For a 2-minute clip, that's manageable. For a 1-hour recording with 2,000 blocks, it's not.

For more on SRT file structure and common errors, see What Is an SRT File.

Method 1: Convert SRT to Text with a Text Editor

For short files under about 100 cue blocks, a plain text editor is the fastest option.

On Windows: Right-click the .srt file and choose "Open with > Notepad." You'll see the full cue structure. Scroll through and delete each cue number line, each timestamp line (they all contain "-->"), and each blank line between cue blocks. What's left is your plain dialogue.

On Mac: Open TextEdit, go to Format > Make Plain Text, then File > Open and select the .srt file. The same cleanup process applies.

Faster with regex: Notepad++ and VS Code both support Find & Replace with regular expressions. These three patterns handle the bulk of the cleanup:

  • `^\d+$` to match cue number lines
  • `^\d{2}:\d{2}:\d{2},\d{3} --> \d{2}:\d{2}:\d{2},\d{3}` to match timestamp lines
  • `^\s*$` to match blank lines

Enable "Regular Expression" mode in the Find & Replace dialog and replace each pattern with nothing. Run all three in sequence, then do a final pass to catch any stray formatting tags (like <i> or <b>) from styled subtitle files.

This method keeps your file on your local machine, which matters for sensitive content. For more on editing SRT files directly, see How to Edit an SRT File.

Method 2: Online SRT to Text Converter for Larger Files

For longer transcripts, a free browser-based converter is the practical choice. These tools accept your SRT file, strip the timestamps and cue numbers automatically, and return clean plain text in seconds.

The process is usually:

  1. Upload your .srt file or paste the SRT content into the text area
  2. Choose your output options (plain text, optionally with or without paragraph breaks)
  3. Download the .txt file

A few converters also offer paragraph reconstruction, where they join fragmented subtitle lines into proper sentences based on speech pause detection. A typical 10-minute video's 400 subtitle cues collapse into 15 to 25 coherent paragraphs when this runs. That saves meaningful editing time if you're turning a lecture or interview into a readable document rather than a raw word dump.

One thing to check before uploading: whether the tool processes your file in the browser (better for private content) or sends it to a remote server. For interview recordings, internal presentations, or anything sensitive, a local-processing tool is the right call.

The limitation with online converters: output quality depends on how the original SRT was structured. Subtitle cues split at timing boundaries, not sentence boundaries. You'll often see fragments like "and that's why we" at the end of one block and "recommend using" at the start of the next. Converters strip the timestamps but don't fix the underlying fragmentation, so some sentence joining will still be needed in your document.

Method 3: Export TXT Directly from PixScript

If you still have access to the source video, a cleaner approach is to skip the SRT-to-text conversion entirely.

PixScript generates a full transcript and exports it as clean TXT. The process takes about 30 to 90 seconds for a 10-minute video:

  1. Paste a YouTube, TikTok, or Instagram URL into PixScript, or upload the audio or video file from your dashboard
  2. Wait for the transcript to generate
  3. Click Export and select TXT

The resulting file is clean dialogue with no timestamp markers, no cue numbers, and no fragmentation from subtitle timing boundaries. Because PixScript transcribes the audio directly (rather than reformatting an SRT), the text reads as full sentences instead of the choppy fragments you often get from subtitle conversion.

If you also need the SRT for video captioning, you can export both formats in the same session. Free accounts get 10 transcripts per month with TXT export. Pro ($9/month) adds SRT, VTT, and PDF export, AI summary, and translation across 10 languages.

This approach works well when your SRT file came out broken or fragmented from the original export, when you need both a subtitle file and a readable transcript from the same session, or when your video is on YouTube or TikTok and you'd rather paste a URL than download the file first.

For the reverse workflow, see How to Create an SRT File from Video.

Which Method Fits Your Situation

SituationBest method
Short file, under 5 minutesText editor
Long file, no access to original videoOnline converter
Still have the video URL or filePixScript TXT export
Need both SRT and plain textPixScript (export both formats)
Sensitive content, no server uploadsText editor or local browser tool

The pattern that trips most people: they convert an SRT to text and get choppy output because the cues were split at timing cuts, not sentence boundaries. A cleaner starting point is exporting a transcript from the transcription step itself rather than trying to reconstruct readable text from subtitle fragments.

Frequently Asked Questions

How do I read an SRT file as plain text?

Right-click the .srt file and choose "Open with Notepad" on Windows, or open it in TextEdit (plain text mode) on Mac. The file displays its raw cue structure: sequence numbers, timestamp lines, and subtitle text. You can read the words, but the formatting markers get in the way. To get clean readable text, strip those markers using a text editor, online converter, or PixScript TXT export.

How do I convert an SRT file to a Word document?

Open Word, go to File > Open, change the file type filter to "All Files," and select the .srt file. Word imports it as plain text including cue numbers and timestamps. For a clean result, strip the timestamps first using a text editor or online converter, then paste the plain text into a new Word document. Alternatively, export a TXT from PixScript and open that in Word directly.

Why does my converted SRT text look fragmented?

SRT cues split dialogue at timing boundaries, not sentence boundaries. A converter removes the timestamps but preserves those splits, so you end up with choppy output. Use an online converter with paragraph reconstruction enabled, or regenerate the transcript from the original video with a tool like PixScript to get properly structured sentences from the start.

What's the difference between an SRT file and a plain text transcript?

An SRT file stores dialogue in numbered cue blocks with start and end timestamps, formatted specifically for video players. A plain text transcript is continuous readable prose with no timing markers. SRT is for video captioning; plain text is for reading, editing, or repurposing content in documents or blog posts.

Clean Text from Video, Start to Finish

The simplest way to avoid SRT-to-text conversion is to generate clean TXT at the transcription stage. PixScript's URL paste and file upload both output directly to TXT, so there's nothing to strip afterward. For situations where you're working with an existing SRT you got from somewhere else, the text editor method handles short files and an online converter handles long ones. Try PixScript free for up to 10 transcripts per month at pixscript.com.